Ambirad QUARTZ GLOW Instruction Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
1.1 Health and Safety
AmbiRad heaters must be installed in
accordance with the relevant codes and
practices. Due account should also be taken of
any obligations arising from the Health and
Safety at Works Act 1974 or relevant codes of
practice. In addition the installation must be
carried out in accordance with the current IEE
wiring regulations (BS 7671), BS 6896:
(Industrial & Commercial) and any other
relevant British Standards and Codes of
Practice by a qualified installer. Isolate all
electrical supplies to the heater & controller
before proceeding.
For your own safety we recommend the use of
safety boots and leather faced gloves when
handling sharp or heavy items. The use of
protective eye wear is also recommended.
Caution
Before using this appliance:
Check that the voltage indicated on the type
plate corresponds to the mains supply
voltage.
Ensure that the heater has been securely
fastened in its final mountain position.
Disconnect from the supply by removing the
plug from the mains socket (or disconnect
pole switch) during installation, cleaning and/
or lamp replacement and always ensure that
the lamp is cool.
Do not locate the heater immediately below
a socket outlet.
UNDER NO CIRCUMSTANCES should any
person attempt to touch any of the lamps
whilst the unit is switched on or when it has
been recently used.
Do not handle the halogen lamp with bare
hands. If it is inadvertently touched, remove
finger marks with a soft cloth and methylated
spirit or rubbing alcohol, otherwise the marks
will burn into the quartz glass, causing
premature heater failure.
Do not use an extension cord with this
product.
Keep the mains cord away and from the
body of the heater and never in the beam of
heat, which will get hot during use.
Titan products ONLY - Only a 13A fuse
must be fitted to the plug.
UNDER NO CIRCUMSTANCES should any
item be placed on or above any part of the
heater, whether the heater is being used or
not.
Ensure that children do not tamper with the
heater.
Do not insert any object through any slot or
opening in the heater.
Do not use if guard is not present (Guard
optional on Apollo range).
Do not install less than the minimum
mounting distance from the floor.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
WARNING: This heater is not equipped with
a device to control the room temperature. Do
not use this heater in small rooms when they
are occupied by persons not capable of
leaving the room on their own, unless
constant supervision is provided.
Apollo products ONLY - This heater is for
indoor use only - do not install outdoors or
use the heater in a damp area, for example
a bathroom or near to a swimming pool.
Titan products ONLY: The unit must be
operated in the vertical position and must not
be moved when switched on.
WARNING: This appliance must be
earthed.
Risk of Fire
Keep combustible materials such as furniture,
papers, clothes and curtains at least 1.8m (6
feet) from the front of the heater and away from
the sides and rear.
1.2 Model Definitions
QH (QHL) = AmbiRad Apollo range of indoor
heaters. Power options from 1.5kW to 9.0kW.
Vertical and Horizontal adjustment.
SOR (DL/TW) = AmbiRad Sorrento range of
robust weatherproof heaters (IP24 rated).
Power options from 1.5kW to 4.5kW. Available
in a single, double or triple option.
TI-STAT = AmbiRad Titan static heater. 3kW
spot heating.
TI-MOB = AmbiRad Titan mobile heater. 3kW
spot heating, lockable wheels.
1. Installation Requirements.
Isolate any electrical supply to the
heater and controller before proceeding.
Page view 2
1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments